Installation & Assembly

1) Position the bases at
16” (40 cm.) distance one an
other (see drawings for
details).
2) Level both base in order to
have an ideal leveled surface
where to lay both the table
tops.
3) Lay one at the time the
table top and secure with the
crew provided.
4) Put the structural bars with
the screws provided. While
you tighten the screws make
sure the tops are held tightly
one next to the other.
1) Position the bases at
19” (49 cm. ) distance one an
other (see drawings for
details).
2) Level all bases in order to
have an ideal leveled surface
where to lay all table tops.
3) Lay one at the time the
table top and secure with the
crew provided.
4) Put the structural bars with
the screws provided. While
you tighten the screws make
sure the tops are held tightly
one next to the other.
ASSEMPLY INSTRUCTIONS:
ANTARES 420
ASSEMBLY INSTRUCTIONS:
ANTARES 300