User's Manual

Select to turn the hourly notice ON or OFF, it will give the voice report hourly if the switch is ON.

SETUP>>>>SEVER

ID Menu Options

1 Sever Configure the server IP, port and user number.

2 Platform QR code Scan a QR code to setup the server IP

3 Stream H.264, H.265

4 Bitrate Select different resolution and bitrate for streaming

5 Upload frequency 0~999 seconds optional

6 FTP Setup the FPT information for uploading

7 Geo-fence alert ON,OFF

1. Server

Setup the server IP, port, and user number, make sure the camera can connect to the center server.

2. Platform QR code

Scan the QR code, it can setup the server IP automatically.

3. Stream

Setup the live streaming encoding mode, H.264 or H.265.

4. Stream bitrate

Select the bitrate for the live video streaming.

5. Upload frequency

Select the GPS upload frequency time, it means every this certain time, it will upload a GPS info

to center server.

6. FTP

Setup the FTP information, such as FTP IP, FTP port, username and password, as well as the http

port, as long as the FTP network is normal, you can go to APP>>>>upload, select the video or

pictures, upload to the center server.

7. Geo-fence alert

Option is ON or OFF, when it’s ON, it will have beep alert when camera enter into a special area,

this area will setup in the center server.