User's Manual

10
before the video recording button is pressed.
8. Post-recording
Post-recording means how long the camera should continue to record after the video recording
button is pressed to stop recording.
9. Motion detect
When the option is on, if there is something moving in the camera, the camera will start to
recording. You can press the recording button to stop recording.
10. GPS watermark
When the option is on, the GPS info will display in the video image, even in the recorded video
and streaming video.
11. Communication tone
The is option means when the two-way audio communication function is enabled, the tone is
vibration or use the incall tone, and adjust the volume.
12. Media Volume
Select volume level option to increase or decrease all the volume of camera, including playback,
key sound, indicate sound and so on.
13. Warning tone
There are two options, voice and beep, voice option means when the user operates camera, it will
give the corresponding response, OFF, beep or voice, and it will applied to the operations as
follows:
1. Start video recording;
2. Stop video recording;
3. Start audio recording;
4. Stop audio recording;
5. Power on the camera;
6. Power off the camera;
7. Low battery;
8. Inadequate storage space;
Beep option means it only beep when do the operations.
14. Hourly notice