User's Manual

2K 2560*1440 30FPS

4K 3840*2160 30FPS

2. Video quality

Select video quality based on the need of video recording. High means the best quality, which will

encoding with big bit rate.

3. Segment time

Segment time selection defines the length of each video segment, and this option only is used for

video recording, invalid for audio recording.

Sub-option: Auto, 1 minutes, 3 minutes, 5 minutes,10 minutes, 20 minutes, 30 minutes; auto

means it will create a file in almost 2GB size, and the time is about one hour, depends on the video

resolution.

4. Photo pixel (Cam1)

Cam 1 means the front main camera. The photo pixel provides options for still image resolution,

3M~48M optional.

5. Photo pixel (Cam1)

Cam 2 means the rear second camera. The photo pixel provides options for still image resolution

6. Snapshot

In preview mode, Long press the snapshot button to shoot the selected number of pictures,

and you can set the option as 1PCS, 2 PCS, 3 PCS, 5 PCS,10PCS, 20PCS, 30PCS. When video

recording is working, the function will not work; When video recording is working, short press

snapshot button can take one single photo.

7. Snapshot timing

OFF means disable this function, and for the timing option: 30sec, 1min, 2min, 4 min, 5 min, it

means every this time it will take a snapshot.

Pre-recording saves an additional seconds of video before the video recording button is pressed,

and the additional seconds is about 30 seconds. After the option of pre-recording is enabled, the

camera can not snapshot, but the snapshot will work during the video recording.

For example, we set the value(between setting the pre-recording and pressing the video recording

button) as X, if X <30s, the camera will store an additional video for X seconds before the video

recording button is pressed, if X>=30s, the camera will store an additional video for 30 seconds