User's Manual

5
1.3 Battery
1. Plug one end of the data cable into the USB of the charger, and then connect the charger
to a power outlet;
2. Plug another end into the I/O jack of the device;
3. Upon completion of charge, unplug the data cable from your device, and then disconnect
the charger from the power outlet.
Prompt
1. Your device can monitor and display information concerning the battery. Tap
on the
status bar to display the power level.
2. When the battery is charging, if your device is ON, indicator
is displayed on the status
bar; if your device is OFF, message “Charging” is displayed on the device screen.
3. When the power level is low, a prompt pops up, informing you to disable antenna. If the
battery charge is extremely low, the device will shut down automatically. Please charge the