User's Manual

Coolpad Quattro
®
II 4G Health/Safety/Warranty Guide 25
generally, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for
safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each
model.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the
FCC RF emission guidelines.
The highest SAR value for this model phone when tested for use at the ear is 0.4 W/kg and when worn on the body, as described in this
user’s manual, is 1.45 W/kg. While there may be differences between SAR levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this
device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn
operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this
device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn
accessory should be avoided.
SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID.
To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number
for your phone, follow the instructions on the website and it should provide values for typical or maximum SAR for that phone.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA)