User Manual

35
deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could
result since air bags inflate with great force.
Safety Information
Please read and observe the following information for safe and proper use of your wireless device and to prevent
damage. Also, keep the user guide in an accessible place after reading it for ease in locating it for future reference.
Violation of the instructions may cause minor or serious damage to the device.
1. Do not disassemble, open, crush, bend or deform, puncture or shred your equipment.
2. Do not modify or remanufacture your equipment. Do not attempt to insert foreign objects into the battery. Do not
immerse your equipment in water or other liquids, or expose it to water or other liquids, fire, explosions or other
hazards.
3. Do not short-circuit the battery or allow metallic conductive objects to contact the battery terminals.
4. Avoid dropping the device. If the device is dropped on a hard surface or elsewhere, take it to a service center for
inspection if damage is suspected.
Charger and Adapter Safety
1. The charger and adapter are intended for indoor use only.
2. Insert the battery pack charger vertically into the wall power socket.
3. Only use the approved battery charger so as to avoid serious damage to your device.
4. When traveling abroad, only use the approved battery pack charger along with the correct adapter.
Battery Information: Care and Proper Disposal
1. Please dispose of your battery properly or take it to your local wireless carrier for recycling.
2. The battery doesn’t need to be empty before recharging, and replace the battery when it no longer provides
acceptable performance. Note: The battery can be recharged several hundred times and it does not need to be
empty in order to recharge.
3. Use only Coolpad-approved chargers specific to your device model as they are designed to maximize battery life.
4. Do not disassemble or short-circuit the battery.
5. Keep the battery’s metal contacts clean.
6. Recharge the battery after long periods of non-use to maximize battery life. Note: Battery life will vary due to
usage patterns and environmental conditions.
7. Use of extended backlighting, Browser, and data connectivity kits affect battery life as well as talk/standby times.
8. The self-protection function of the battery cuts the power of the device when its operation is in an abnormal state.
Explosion, Shock, and Fire Hazards
1. Do not put your device in a place that is subject to excessive dust, and always keep the minimum required distance
between the power cord and heat sources.
2. Unplug the power cord prior to cleaning your device, and clean the power plug pin when necessary.
3. When using the power plug, ensure that it’s firmly connected.
4. Placing the device in a pocket or bag without covering the device receptacle (power plug pin), metallic articles (e.g.:
coins, paperclips, pens) may short-circuit the device. Always cover the receptacle when not in use.
5. Metallic articles that come into contact with the device may short-circuit the + and – battery terminals (metal strips)
which may result in battery damage, or even an explosion.
General Notice
1. Using a damaged battery or placing a battery in your mouth may cause serious injury.
2. Placing items containing magnetic strip components (e.g.: credit cards, bank books, subway tickets) near your
wireless device may damage the data stored in the magnetic strips.
3. Talking on the wireless device for long periods of time may reduce call quality due to heat generation.
4. Do not use the wireless device if the antenna is damaged as it may cause a slight contact burn. Please
communicate with a Coolpad Authorized Service Center to replace the damaged antenna.
5. Do not immerse your device in water. If this happens, immediately turn the device OFF and remove the battery. If
the device does not work, take it to a Coolpad Authorized Service Center.