User's Manual

EX
X70
M
o
b
i
l
e
I
n
t
e
r
n
e
t
D
e
v
i
c
e
13
English
MID
Separating · Attaching Battery
Separating Battery
Depress the Battery Separation/Lock button on the rear of the station in direction as shown
in the gure. Slightly push the battery up in the battery separation groove and then separate the
battery.
Attaching Battery
Align the battery in the groove as shown in the gure below and then press it until it is closely
attached to the main body. Push up the Battery Separation/Lock button on the rear of the station
in direction as shown in the gure below.
Separate the charger after turning the power of the station off.
If not, you may receive an electric shock by a short circuit in the battery power part.
Notice
If the battery is misaligned with the groove and you attempt to mount the battery, the device may
be damaged.
Notice