User’s Manual This guide may be changed for product improvement without prior notice.
Thanks for purchasing viliv. Please read the precautions throughly before using the product.
Copyright Yukyung Technologies Corp. has the copyright for this guide. Contents of this manual may not be copied or produced in any form or means without prior authorization from Yukyung Technologies Corp. ©2010 Yukyung Technologies Corp. All rights reserved. Certification This device has acquired EMC certification for home use (Class B) and is designed not only for use in residential area but anywhere.
Contents Safety Precautions for Use................................................................4 Names of Parts....................................................................................7 Basic Components...........................................................................................................7 Front View...........................................................................................................................8 Keyboard...........................................
Safety Precautions for Use Warning Please observe the instructions below. Failure to do may cause heating, fire, explosion, etc. ■■If the battery can be seen to be swollen, there may be imminent danger. Immediately contact the manufacturer or sales representative. ■■Only use an eligible specified charger. ■■Keep the device away from open flames. (Do not put it in a microwave.) ■■Do not leave the device in a car in summer. ■■Do not store or use the device in a hot and wet place like a bathroom.
Safety Precautions for Use The precautions below are provided to prevent bodily injury or property damage by using this product correctly. Please observe the precautions. Precautions on Power ■■Do not touch the power adaptor with wet hands. ■■Plug the power cord into an outlet with grounded jack. ■■Be sure the plug goes in all the way and is not loose. ■■Do not use your device if it is damaged, including an exposed or peeled power cord.
Safety Precautions for Use The device functions vary depending on model. Read the relevant precautions for the provided function before using the device. Precautions for GPS ■■When initially operating this device, it is recommended you warm it up for over 15 minutes under a clear open sky and open area. ■■If the vehicle equipped with this device is not used for 7 days or longer, the data storage recharger inside the GPS may be discharged and require warming up time of over 15 minutes.
Names of Parts The appearance of the components below may differ from the actual components and some components are subject to change.
Names of Parts Front View 1 2 3 4 5 6 7 1 WEBCAM Equipped with webcam. 2 TFT LCD/Touch Screen Users can operate the device using the touch screen. 3 Speaker Speaker is built in. 4 Power Button/Power Lamp For turning the power on/off, and checking the status of power. 5 Optical Joystick For moving the mouse pointer.
Names of Parts Keyboard The keyboard may be different for each country. In order to use the orange colored keys on the keyboard, press the keys and the Fn key together. 3 2 1 4 5 6 7 8 9 10 1 Optical Joystick Key Use these keys for left or right mouse click. 2 Esc Key It is usually used for terminating or interrupting programs. 11 Function Keys (F1~F12) and Number Keys Usages are different depending on the operating system used and application program. Function keys and numbers from 0 to 9.
Names of Parts Left / Right View 4 1 5 2 3 10 1 USB HOST Port For connecting to external devices with USB port. 2 MicroSD Port This port is for using MicroSD memory device. 3 Power Adaptor Port For connecting power adaptor or charging the battery. 4 Antenna This antenna is for 3G. (option) 5 Battery Removal Button Press this button to remove the battery.
Names of Parts Lower Side 1 3 2 1 Earphone Port For connecting earphone 2 Built-in Microphone Internal microphone is built in. 3 Hand Strap Loop Rear View The figure below shows the rear side of the main body without the battery. (Refer to Page 16~17 for Separating/Attaching battery.) 1 2 1 Battery Charging Port Connection part of battery terminal.
Installation and Cable Connection Connecting Earphone Insert the earphone to the earphone port on the lower side of the handset. USB HOST Connection This is used for the connection of external devices, such as digital camera, external HDD, etc.
Installation and Cable Connection Power Connection (Charging Adaptor) The charger is connected to the power adaptor terminal on the left side of the station.
Installation and Cable Connection Inserting · Extracting MicroSD Memory Card How to Insert : Align the rear face of the MicroSD memory card toward the MicroSD memory slot and push it in until you hear a clicking sound. (Do not use excessive force as it could damage the MicroSD memory card) How to Extract : Press the tip of the MicroSD memory card gently and it will be removed automatically as it is a one-touch removal type.
Installation and Cable Connection Inserting · Extracting USIM Card (Optional) How to Insert : Let the front of a USIM card face the USIM card slot and then push it in the arrow direction until a click sound is heard. (If, however, you push the USIM card using too much force, the card may be damaged.) How to Extract : Since this device adopts a one-touch method, you may gently press on the end of the USIM card to extract it automatically. (Pull out the USIM card slightly protruded.
Separating · Attaching Battery Separating Battery How to Remove the Battery Press the Battery Open button on the right side of the handset Push the button in the direction of the arrow. Hold the tip of the battery and lift it up. Notice To avoid electric shock, make sure to turn the power off first and then separate the battery.
Separating · Attaching Battery Attaching Battery How to Insert the Battery Push the battery in the direction of the arrow. Notice If the battery is misaligned with the groove and you attempt to mount the battery, the device may be damaged.
Basic Operation Turning the Power On/Off Turning the Power On Depress the power button for about two seconds to turn on the power. ZZ The LCD screen turns on and the main screen is displayed. Turning the Power Off Use the Shutdown menu in the Start Menu to turn off the device while Windows is running. If the system locks up while using the device, depress the power button on the left for a long duration while the device is on to turn the power off.
Basic Operation Set Up for viliv Manager viliv Manager is executed by double touching vilivManager on the screen. 1 Wireless LAN Power Activate the wireless LAN. 2 Bluetooth Power Activate the Bluetooth function. 3 Camera Power Activate the webcam. 4 Modem Power Activate the Modem function. 3 5 System Information To check the product information. 4 6 Config Configure the environment settings. 1 2 5 6 WiFi and EVDO Mode do not operate simultaneously.
Recovery Solution (AMI Rescue) Guide When OS does not work properly, you can recover the device to the factory default following to this guide. Way to Use Recovery Solution (AMI Rescue) 1 Execution of Recovery Solution (AMI Rescue) When viliv logo appears to boot the system (BIOS POST), press the F10 key 1-2 times. ZZ As the logo disappears, Pre-Boot Menu window appears. ◆ In order to use F10 key in N5 Premium, press F10 key while pressing the Fn key on the lower right side of the keyboard.
Specifications The specifications below may be changed for enhancement of product performance without prior notice. General Specifications Product Name N5 Premium CPU & Chipset Intel® AtomTM 1.33 Ghz (Z520) + SCH US15W LCD 4.8-type WSVGA (1024 x 600) / Touch Panel RAM 1GB Storage SSD 16GB, 32GB, 64GB LAN IEEE 802.11b/g WWLAN (Optional) WiMAX, HSDPA Bluetooth Bluetooth Ver2.
Memo 22 English
Memo English 23
Memo 24 English
