Operation Manual

640x480 / 30 кадров/сек
PAL/NTSC*
SD (32 Гб, поддержка SDHC)
50 мин
Mini USB
195x80x59
-10 °C ~ +50 °C -10 °C ~ +50 °C
768x576 / 656x492 768x576 / 656x492
КМОП КМОП
Тип матрицы
3,5/4,2
42
≥34
5,5/4,5
0,5
5/5,8
50
≥34
4/3,5
1
125
125
Видимое увеличение (CCIR/EIA), крат
Угол поля зрения, гориз. (CCIR/EIA), град
Choose the tab “Enable/Disable Preview” (pic. 6) and turn on the NV device – now the image seen
through the NV device is transmitted to the PC monitor.
Note: the file “Video Converter” should be used for OS Windows Vista and Windows 7. If you run OS Windows
XP you can use a default programme like MovieMaker or similar.
Push the “Start/Stop Capture” button to start/stop video recording.
ATTENTION! In order to record another video file, choose saving directory again and type the name of
the file, which is different from the name of the previous file. Failure to do so will cause the new video file
to save under the old name and the previous recording will be deleted.
Copy the “settime.txt” file from the folder with software programs located on the supplied memory card, to the
root folder of the memory card.
Open the copied file “settime.txt”, type information about the current date (format yyyy/mm/dd and time
(format hh:mm:ss) and close the file “settime.txt”.
Now the information on the current date and time will be recorded in the properties of video files. File
“settime.txt” will be deleted from the root folder of the memory card.
Turn off the video recorder and the NV device, disconnect the device.
Разрешение, штрихов/мм