User's Manual

Product Marketing
OMEGA-1 User Manual
2006-07-18 Page 35, 53 Pages
Total
上海禹华通信技术有限公司
YuHua TelTech (Shanghai) Co., Ltd.
YuHua Teltech
All rights are reserved. Reproduction in whole or in parts is prohibited without the written consent of the copyright owner.
have to ask your network service provider for PUK. If you have entered wrong PUK for 10 times, your SIM card will be
burned.
Changing your PIN
You can change your PIN code only when the PIN is activated.
Go into the menu and enter the old PIN code, then enter your new PIN and select “OK”. Your phone will then give an
indication to tell you that the PIN has been modified.
Firewall
You can bar calls and short messages from certain numbers through firewall.
Short message firewall
In standby mode, select Short message in Setup/Security/Firewall, then tap the Left Soft Key to go into menu options
and add and save new numbers. Or you may select numbers from your address book to add to the firewall list. You
can edit or modify the firewall list.
Incoming call firewall
In standby mode, select Dialing in Setup/Security/Firewall, then tap the Left Soft Key to go into menu options and add
and save new numbers. Or you may select numbers from your address book to add to the firewall list. You can edit or
modify the firewall list.
Setup
You may set your phone to open or close the short message firewall and incoming call firewall.
Information about the barred short message and calls are recorded in the Firewall Log.
Code protection
You can select whether to open or close the code protection function of your phone to protect your personalized
information, such as short message/multimedia message, address book, calling record and power on. After your
phone is powered on, if you want to visit these menus, you are required to enter the code, which is originally set to 0000.
Changing the code
You may change the original code of 0000 to your familiar numbers.
Recover to the original settings
Once recovered, some personalized settings will be removed to the original status.
Screen setup
Standby style
1. Select Set up>Screen setup>Standby style in the main menu and tap “OK”.
2. Select the Monthly calendar, Analog clock and Digital clock displayed on the screen when your phone is in standby
mode.
Standby content
1. Select Set up>Screen setup>Standby content in the main menu screen and tap “OK”.
2. Select the Wallpaper, Date, Week and Lunar calendar displayed on the screen when the phone is in standby mode.
Wallpaper setup
1. Select Set up>Screen setup>Wallpaper and tap “OK”.
2. Select the needed wallpaper in the picture list, and you can conduct operations such as Previewing, Thumbnail