Instructions / Assembly

Remote Control ( Emitter ) Operation
.13.
Visit www.pmwfan.com for further assistance.
1.Insert the 2 pcs of batteries (provided)
into transmitter.
2.Turn on the power supply to the fan.
Within 10 sec, press and hold the “1”
and “2” button for about 3 sec. Once
the receiver has detected the frequen-
cy, receiver will “Beep Beep” twice.Pro-
gramming process is completed and fan
is ready to use.
3
4
5
6
1
2
1H 3H
6H
Fan Speed
(1/2/3/4/5/6)
Fan Off
Fan Timer Switch
(1hr,3hr,6hr)
Light brightness “+/-”
Forward/Reverse
LED On/Off
Colour Change
-
+
Transmitter learning
process
Transmitter FunctionRemote Control Holder
Installation
②
③
⑤
⑥
④
①
AAA 1.5V
DO NOT PRESS ANY OTHER BUTTON
DURING THIS PROCESS
If the fan is not responding to the transmitter,
Repeat transmitter learning process.
Press and hold
for about 3 sec