User manual

NO. LABEL OPERATION

1 VGA SETUP DIP Setting Resolution & Frequency

2 VGA D-SUB OUT Connect to CRT or LCD monitor.

3 ETHERNET RJ-45 connector for networking.

4 AUDIO IN Audio input for 1 channel

5 AUDIO OUT Audio output for 1 channel

6 SPOT SPOT Video output

7 MONITOR OUT Video output with BNC & Y/C signal Din connector.

8 ALARM 25 pin D-Sub connector. Alarm input connector.

9 RS-232 / RS-485 9 pin D-Sub connector. For external control of unit.

10 FAN Cooling fan.

11 POWER Power switcher: AC100V~AC240V / 47-63Hz input.

12 Video output Video output with BNC connector.

13 75 ohm Switch between 75 ohm and high resistance.

14 Video input Video input with BNC connector.

3 SYSTEM CONNECTION

3.1 CAMERA & MONITOR LOOPING

75 Ω: If camera looping to other devices or channels and video single are instable,

please switch to this position.

∞: In case of camera input over bright that please switches to this position.

Here recommend link cameras by sequence to avoid unexpected image broken,

from CH1, CH2, CH3, CH4…….