User manual

25
4.12 CDRW BACKUP
▲ or ▼ to change item
◄ or ► to change page
A. START TIME SETUP
Press ENTER key into START TIME SETUP diagram,
and by ▲ or ▼ to change number & by ◄ or ► to switch item,
press ENTER key again confirm the start time,
system would check the start time automatically and back to CDRW BAKCUP.
B. BACKUP CD SIZE
By ◄ or ► to decide backup size and the END time will changed automatically,
and every 1 minute would copy 2MB data into CD disk.
C. CLOSE CD/RW
By ◄ or ► to decide close the CD disk or not.
YES: Close CD R/W disk and can't write in any more.
System would block the inner ring on the disk, and no more data can't be write,
otherwise using CDRW disk & Erase Disk function.
NO: Keep CD R/W in writable status until disk full.
D. ERASE CD/RW
By ◄ or ► to decide close the CD disk or not.
YES: Erase all data on the CD R/W before START BACKUP.
System would remove all data on the CDRW disk, CD-R can't be.
NO: Keep all data on the disk and add new file on the CD R/W.
E. BACKUP CDRW START
Press ENTER to start CDRW backup.
If without CD disk in the CDRW recorder, please put the CD disk in and repress
the ENTER to start CDRW backup.
After backup finish CDRW recorder would eject automatically.
F. BACKUP FILE NAME
Each backup file will named as the time when backup, as like:
10061817.05 will be Oct 6
th
18:17 channel 5.
4.13 LOAD DEFAULT
Press ENTER to load the system default setting, and "LOAD DEFAULT !" would
shown on the screen until restore finish.
CDRW BACKU
P
․START TIME SETUP [<]
START: 2005/10/05 00:01:00
END : 2005/10/05 00:05:00
․BACKUP CD SIZE: 000MB
․CLOSE CD/RW: YES
․ERASE CD/RW: NO
․BACKUP CDRW START [<]