User manual

23
4.10 NETWORK SETUP
▲ or ▼ to change item
◄ or ► to change page
A. IP ADDR
By ▲ or ▼ to switch item & by ◄ or ► to assign an IP address number.
B. GATEWAY
By ▲ or ▼ to switch item & by ◄ or ► to assign the gateway number.
C. SUB NET
By ▲ or ▼ to switch item & by ◄ or ► to assign the submask.
D. IP MODE
By ◄ or ► to change STATIC IP or DHCP.
E. NETWORK ENV
By ◄ or ► to change network environment.
CROSSOVER By crossover cable link to PC directly.
LAN Link to Local Area Network environment.
WAN Link to Wide Area Network / INTERNET environment.
F. NETWORK CHANNEL ENABLED
Press ENTER key into enabled the specific channel for network.
▲ or ▼ to change item
◄ or ► to change page
G. HTTP PORT
By ▲ or ▼ to switch item & by ◄ or ► to change port number.
Preset at 80
H. STRAME PORT
By ▲ or ▼ to switch item & by ◄ or ► to change port number.
Preset at 5000.
NETWORK SETU
P
․IP ADDR: 192.168.001.221
․GATEWAY: 192.168.001.254
․SUB NET: 255.255.255.000
․IP MODE: STATIC IP
․NETWORK ENV: LAN
․NETWORK CHANNEL ENABLE [<]
․HTTP PORT: 80
․STRAME PORT
:
5000
NETWORK CHANNEL SETU
P
․ CH01 : ON
․ CH02 : ON
․ CH03 : ON
․ CH04 : ON
․ CH05 : ON
․ CH06 : ON
․ CH07 : ON
․ CH08 : ON
․ CH09 : O
N