User manual

16
4.3 SYSTEM SETUP
▲ or ▼ to change item
◄ or ► to change value
A. DATA FORMAT
By ◄ or ► to switch Y-M-D, M-D-Y or D-M-Y mode.
B. DATE
By ▲ or ▼ to switch item & by ◄ or ► to change value.
C. TIME
By ▲ or ▼ to switch item & by ◄ or ► to change value.
D. AUTO SWITCH DWELL
By ◄ or ► to change volume.
E. SPOT SETUP
Press ENETR into SOPT STEUP mode or MENU to exit,
By ▲ or ▼ to switch item & by ◄ or ► to change value.
F. DATE AND TIME OSD
By ▲ or ▼ to switch item & by ◄ or ► to change value.
G. SYSTEM TYPE
By ◄ or ► to change value between NTSC / PAL / EIA / CCIR.
The DVR would switch system type automatically, after press MENU key.
H. KEYBOARD LCOK
By ◄ or ► to change value between OFF / TYPE1 / TYPE 2.
TYPE 1: Block all function but channel switch.
TYPE 2: Block all function.
After KEYBOARD LCOK mode setup, please setup the PASSWORD !
If without password, the un-authorized user would access into SYSTEM
SETUP and remove keyboard lock function easily!
I. ID NUMBER
By ◄ or ► to change value.
This ID number identifies the DVR location between DVR & remote controller or
joystick controller.
J. LANGUAGE SELECT
By ◄ or ► to change OSD language.
K. PASSWORD MODE
By ▲ or ▼ to switch item & by ◄ or ► to change value.
Default password number is "1111".
SYSTEM SETU
P
․DATE FORMAT Y-M-D
․DATE 2005/10/10
․TIME H:M:S 00:00:00
․AUTO SWITCH DWELL 02 SEC
․SPOT SETUP [<]
․DATE AND TIME OSD ENABLE
․SYSTEM TYPE NTSC
․KEYBARD LOCK OFF
․ID NUMBER 01
․LANGUAGE SELECT ENGLISH
․PASSWORD MODE DISABLE
․EXIT