User manual

12
PTZ SETUP & FRONT PLANE CONTROL
EXAMPLE :
A PTZ camera at channel 3 with PELCO-D, 9600bps.
1. Press the channel button 3 into full screen mode.
2. Press SEL and “PTZ” mark appear at left upper corner.
3. Press the MENU button into setup mode.
By ▲ or ▼ to switch item & by ◄ or ► to change SPEED/ PROTOCOL &
BAUD RATE.
4. Press the MENU button again back to PTZ control mode.
5. With following label to control PTZ camera.
NO. LABEL PTZ NO. LABEL PTZ
14 ▼ Down 5 PLAY Zoom in
15 ◄ Left 21 ENTER Home
16 ▲ Up 19 AUTO Auto Scan
17 ► Right 6 REW Zoom out
9 MENU PTZ setup 20 SEL
Enter or exit
PTZ mode
6. Press the SEL button quite to PTZ control mode.
REC 2005/10/10 MON 12:00:00 50% 120P
PTZ
REC 2005/10/10 MON 12:00:00 50% 120P
PTZ
PTZ SETUP
O UP-DOWN SPEED: OOOOO
O LEFT-RIGHT SPEED: OOOOO
O AUTO SCAN SPEED: OOOOO
O PROTOCOL TYPE: PELCO-D
O BAUD RATE: 9600