User's Guide

Change the watering mode to By Week Day”, then
tap Setting
Users Guide
Tap any place in Watering Day or  to select the
day you wish to watering
Select or Deselect the day, then “Confirm. The
selected day will be enclosed by a square box
Add cycle (up to 30 watering cycles), select desire
start time and watering duration.
Delete cycle if it is needed by tapping the Delete Key,
then select the trash bin of the cycle you want to
remove.
*Caution, once it is deleted, it will be removed permanently
from the setting. You will need to reprogram it again.
Watering Delay Function:
If there is rain in the forecast and you wish to temporarily
stop watering, set the Water Delay by swiping the bar
to the right then tap the Water Delay key.
Water Delay mode will stop all watering for up to 7 days
After the delay period, the watering program will begin to
run automatically.
You can turn off the rain delay function at anytime by
swiping the bar to the left
Once programming is completed review the main value
dashboard which shows all the values status. Your
scheduling should show the next watering schedule and
other info.