User's Guide

Tap or valve photo to “Valve Setting” to set up
User’s Guide
Setup Zone Valves:
Tap “valve 1” or to change valve name (12
characters in length) and icon. Repeat the step for
the rest valves
Tap Valve 1, 2, 3 or 4 to rename
If you are using more than one valve on your controller
unit, you can also replace the valve’s photo and the
name to easily distinguish between them where you
want to water.
Tap the watering mode

to change watering mode to
“By Frequency” or “By Week Day”
Select “By Frequency”, then tap the “Setting” key
By selecting Frequency, you can have the device run
multiple times in one day
Tap “Start Time” to select desire watering time
Program Your Watering Schedule:
Tap to “Valve Setting” to adjust the watering
schedule
Swipe the “Program” bar to turn on the programming
mode to select your watering selections