User's Guide

Compatible with Bluetooth® 4.0 devices (minimum
required iOS 9 and Android V7.0). Pairing is required
only once. On subsequent operations of the app, the
app will synch automatically with the controller and will
display the paired controller status screen.
Please visit Google Play Store or App Store, search for
“Eden Water Timer”, or scan the bar code on the
controller package to download the app. You need to
have an account on both sites to have access to the
store. The EDEN® Water Timer App is free.
User’s Guide
Pairing your Smart Phone with
EDEN® Bluetooth® Controller:
1. Download and install the EDEN® Water Timer App :
2. Insert 4 Alkaline batteries to the Bluetooth® timer
controller (batteries are not included). Remove the
battery tray and install the batteries. Firmly reinstal
the battery tray back into the Bluetooth® timer.
3. Your Bluetooth® timer is now in pairing mode and
will flash a green light every 2 seconds. You will
also hear two clicks about 2 seconds apart, this is
normal and ensures the valve is closed before you
turn on the water.
*Replace batteries when timer flashes a red light or when
the app notifies you that batteries need replacing.
Please use only Alkaline batteries.
4. After the app is installed, tap to launch the app.
The app prompts you to set up Bluetooth®
controller. The app displays the various Bluetooth®
controllers. Don’t forget to activate Bluetooth of your
smartphone or tablet. If you have forgoetten to
activate your smartphone or tablet, the app will
suggest you to activate it.
5. Install the Bluetooth® timer:
Connect the timer to an outdoor hose faucet. Make
sure the timer is securely fastened. Your timer is now
ready to be used with any product that can be
attached to a standard hose adaptor. You can attach
up to 4 hose devices per timer.
6. Turn on Your Water:
The water supply must remain on for the timer to
work properly.
*Stop Watering: You can stop watering at any time
whether it is during manual watering, or during a
programmed time.