User guide

PC6000 Menus Section 4
YSI Incorporated PC6000 Software Operations Manual 13
Filename: SAMPLE.DAT
MODIFY VIEW SYSTEM
Parameters... Header Print Report
Control Info... Report Print Plot
Scaling Info... Plot Definitions...
Statistics
The following descriptions are the various options under the
File
menu, beginning with MODIFY,
then VIEW, and finally SYSTEM.
4.1.1 MODIFY
Any modifications performed with these functions will allow you to customize data and format
reports and plots for a selected file only. See
Setup
later in this section to change default values
permanently. Select
Parameters
from the Modify menu.
The Parameters menu helps you define the way you want your reports and plots to appear. When
you highlight any parameter on this display and press
Enter
, the submenu appears. Each of the
submenu functions is described below. You may select one parameter for the X-axis, and up to
twelve parameters for the Y-axis.
Select
Add parameter here
to add a parameter to a report or plot. A list of all available parameters
that can be added will be displayed. Choose those parameters that you want to be included in
reports and plots.
Select
Delete this parameter
to delete the highlighted parameter from reports and plots.
Select
Move parameter up
or
Move parameter down
to shift the highlighted parameter up or
down one position. By using these options all parameters within a report and plot can be displayed
in the order you prefer.
X-axis parameter
------------------------
Date + Time
Y-axis parameter
------------------------
Temperature C
Specific Cond mS/cm
DO mg/L
pH
ORP mV
Add parameter here
Delete this parameter
Move parameter up
Move parameter down
Detail this parameter