User guide

Capture, Retrieve and Analyze Data Section 3
YSI Incorporated PC6000 Software Operations Manual 11
highlight the desired file and then press
Enter
to access the selected file. If only one file resides
in the directory, it will automatically load into PC6000.
Filename:
CLRLAKE2.DAT
MODIFY VIEW SYSTEM
Parameters...
Control Info...
Scaling Info...
Header
Report
Plot
Statistics
Print Report
Print Plot
Definitions
Export
Any changes you make from this menu will affect only the file listed, in this case
CLRLAKE2.DAT. To change default values for all files, see
Section 4.1, File Menu.
To view general information on the screen including filename, site description, a list of active
sensors, logging information, and more use the arrow keys to highlight
Header
and press
Enter
.
Press
Esc
to return to the File menu.
Using the arrow keys highlight
Report,
press
Enter
and the information will scroll by. You can
view a time-stamped report of the entire set of data collected in the study. Press
Pause/Break
to
stop the report and press
Enter
to resume. Press
Esc
to return to the File menu.
Select
Plot
to view a graphical expression of the data from the study. All Reports and Plots can
be customized to your preference.
Press
Esc
until the menu of the PC6000 program appears. You have now completed Basic
Operation of the sonde, which included basic calibration procedures, basic sampling and
deployment procedures, data capture, and data retrieval and viewing using PC6000 software.