User manual

Operation System 182-XT-4
4 - 4
ba76027e02 12/2014
4.3 Working with the SETTINGS menu
4.3.1 Selection menus
Pressing
S switches from the measured value display to the
SETTINGS menu (main menu).
Fig. 4-2 SETTINGS menu (main menu)
Operating notes
 In the main menu, the lock symbol shows the current safety level for
the settings
–
a Settings not protected by password
–
z Settings protected by password (reading possible only)
For more detailed information on password protection, see
section 4.6.
 The arrows 8/2 appear automatically if further display contents are
above or below the visible display range.
 The toggle switch
w is used to highlight a menu item (displayed in
reverse video) and move the visible display range up or down.
 To open a menu item, highlight it and press
g. The display
switches to a further submenu or to a setting table.
 To return to the measured value display, press
m or e.
All settings in the SETTINGS menu can be protected by a
password against unauthorized changing. For more
detailed information on password protection, see
section 4.6.