User manual

Installation System 182-XT-4
3 - 38
ba76027e02 12/2014
Fig. 3-30 24 V AC/DC connection.
WARNING
No free wires must be allowed to project into the enclosure.
Otherwise there is the danger of short circuits that can cause a
fire. Always cut off any wires that are not in use as closely as
possible to the cable gland.
The complete assignment of the terminal strip is shown in
section 3.12.
8 Connect wires 1 and 2 to the terminal strip. Make sure that the
cable assignment agrees with the specification on the terminal
label under the terminal strip.
9 Tighten the coupling ring (pos. 3 in Fig. 3-29).
10 Close the enclosure of the DIQ/S 182 XT-4-PR.
Terminal
labeling:
X17
X16
24V AC DC
INPUT
POWER