User manual

Installation System 182-XT-4

3 - 28

ba76027e02 12/2014

3.5.4 Top hat rail mounting

Materials required  THS/IQ kit for top hat rail mounting (see chapter 11 A

CCESSORIES

AND OPTIONS).

Tools  Phillips screwdriver.

Mounting the

DIQ/S 182 XT-4-PR on a

top hat rail

Fig. 3-21 Mounting the DIQ/S 182-XT-4-PR on a top hat rail

1 Screw the clamping assembly (item 1 in Fig. 3-21) with the two

plastic self-tapping screws (item 2) onto the back of the DIQ/

S 182 XT-4-PR.

2 Attach the DIQ/S 182-XT-4-PR onto the top hat rail from above

using the clamping assembly and press against the rail until

the clamping assembly clicks into place. The DIQ/S 182-XT-4-

PR can subsequently be pushed sideways.

3 To unhook the DIQ/S 182-XT-4-PR, press it downwards and

pull it forwards at the bottom.

For sta

ck mounting

remove label

and insta

ll contact carrier