User manual

Installation System 182-XT-4
3 - 18
ba76027e02 12/2014
Fig. 3-12 Prepared cable end
Connecting the cables The SNCIQ and SNCIQ/UG cables are connected to the terminal strip
in the same way as the SACIQ sensor connection cable (see
section 3.4.5):
SNCIQ
SNCIQ/UG
approx. 35 mm approx. 45 mm
approx. 45 mm
1 Open the enclosure of the DIQ/S 182-XT-4-PR or the
MIQ module.
2 Select a free SENSORNET connection. At the same time, look
out for the SENSORNET designation on the label on the
bottom of the enclosure.