User manual

Installation System 182-XT-4

3 - 16

ba76027e02 12/2014

Fig. 3-11 Closing the enclosure (variant 2)

3.4.4 Distributed mounting

General information For the locally separated connection between DIQ/S 182-XT-4-PR and

MIQ modules and between MIQ modules, the following cables can be

used:

 SNCIQ cable

 SNCIQ/UG earth cable - suitable for underground laying in

accordance with VDE 01816, Part 2 and DIN/VDE 0891, Part 6.

The cables are delivered as piece goods (please specify length when

ordering!).

SENSORNET

connections

The DIQ/S 182-XT-4-PR has a SENSORNET connection on the front

terminal strip and four others on the rear terminal strip. The terminal

strips are shown in section 3.12. In addition, free SENSORNET

connections can all be used in the system, e.g. the two SENSORNET

connections of an additional power supply module. All SENSORNET

7 Attach the prepared MIQ module to the back of the DIQ/S 182-

XT-4-PR. At the same time, ensure that the two clips on the

DIQ/S 182-XT-4-PR click into place in the lid of the

MIQ module. Subsequently, tighten the two screws (pos. 8 in

Fig. 3-9).

8 Close the MIQ module and fix it with the two countersunk

screws (pos. 5 in Fig. 3-11).

MIQ module

DIQ/S 182 XT-4-PR