User manual

Installation System 182-XT-4

3 - 14

ba76027e02 12/2014

Mounting the contact

base

Fig. 3-8 Mounting the contact base (variant 2)

1 Remove the covers from the drilled mounting holes (pos. 1 and

3 in Fig. 3-7).

2 Remove the contact cover (pos. 2).

3 Pull off the adhesive label (pos. 4).

4 On the MIQ module, remove the two countersunk screws (pos.

5) and swing open the module lid.

Only use the plastic tapping screws supplied for attaching

the contact base. They ensure the correct fit.

5 Fix the contact base (pos. 6 in Fig. 3-8) onto the DIQ/S 182-

XT-4-PR with the two plastic self-tapping screws (pos. 7).

DIQ/S 182 XT-4-PR