User manual

System 182-XT-4 Installation

3 - 11

ba76027e02 12/2014

Mounting the contact

base

Fig. 3-3 Mounting the contact base (variant 1)

1 Remove the covers from the drilled mounting holes (pos. 1 and

3 in Fig. 3-2).

2 Remove the contact cover (pos. 2).

3 Pull off the adhesive label (pos. 4).

Only use the plastic tapping screws supplied for attaching

the contact base. They ensure the correct fit.

4 Fix the contact base (pos. 5 in Fig. 3-3) onto the DIQ/S 182-

XT-4-PR with the two plastic self-tapping screws (pos. 6).

5 Remove the two countersunk screws (pos. 7 in Fig. 3-3) of the

DIQ/S 182-XT-4-PR and swing open the lid.

DIQ/S 182 XT-4-PR