Instruction Manual

13
ENGLISH
Operating Messages & Error Codes
Operating messages
Measuringrangeexceededorexcessiveturbidity.
Resultbelowthelowestlimitofthemeasuringrange.
Replacebatteries,nofurthertestspossible.
Batterycapacityistoolowforthedisplaybacklight;
measurementisstillpossible.
Ausercalibratedmethodisindicatedbyanarrowwhilethetestresultis
displayed(see“Factorycalibrationreset“).
Error codes
Lightabsorptiontoogreat.Reasons:e.g.dirtyoptics.
Calibrationfactor„outofrange“
Too much light reaching the detector.
Too much light reaching the detector.
Batterycapacitywastoolowduringmeasurement.Changebattery.
LR: Factorycalibrationincorrect/erased
LR: Usercalibrationincorrect/erased
MR: Factorycalibrationincorrect/erased
MR: Usercalibrationincorrect/erased
Battery Disposal
The910CODColorimeterispoweredbyalkalinebatterieswhichtheusermust
removeanddisposeofwhenthebatteriesnolongerpowertheinstrument.Dis-
posalrequirementsvarybycountryandregion,andusersareexpectedtounder-
standandfollowthebatterydisposalrequirementsfortheirspeciclocale.
Hı
Lo
E 10 / E 11
E 70
E 71
E 72
E 73
E 22
btLo
Time Cal
Store Date
RESULT
Cal
E27 / E28 / E29
E23 / E24 / E25
E 20 / E 21