Instruction Manual

11
ENGLISH
FACTORY CALIBRATION RESET
Resettingtheusercalibrationtotheoriginalfactorycalibrationwillresetallme-
thods and ranges.
Ausercalibratedmethodisindicatedbyanarrowwhilethetestresultis
displayed.
Toresetthecalibrationpressboththe[MODE]and[ZERO/TEST]key
and hold.
Turntheunitonusingthe[ON/OFF]key.
Releasethe[MODE]and[ZERO/TEST]keysafterapprox.1second.
Thefollowingmessageswillappearinturnonthedisplay:
Thefactorysettingisactive.
(SELstandsforSelect)
or:
Calibrationhasbeensetbytheuser.
(Iftheusercalibrationistoberetained,turntheunitoffusingthe
[ON/OFF]key).
Calibrationisresettothefactorysettingbypressingthe[MODE]key.
Thefollowingmessageswillappearinturnonthedisplay:
Turntheunitoffusingthe[ON/OFF]key.
cAL
SEL
SEL
CAL
CAL
SEL
Mode
On
Off
Mode
On
Off
Zero
Test
Time Cal
Store Date
RESULT
Cal