User Manual

YSI 5200A
16
YSI 5200A
17
Accuracy ± 2% or ± 0.1 ppt
Resolution 0.1 ppt
*Conductivity auto ranges based on the measured value.
Component and System (Non Input) Specications
Hardware
System System Feature Specication
Display/LEDs back-lit graphic LCD
(320X240) with timer
readings updated 2 times per
second
diagnostic troubleshooting
LEDs
Outputs 4 on-board relays 240VAC@ 5AMPs switching
capacity; 110VAC@10AMPS;
type: SPDT
Timer Systems 4 timers 10 daily events per timer system
1 feed timer includes sensor & FCR control
Power: ere are two 5200A versions available. e DC version can only be pow-
ered by DC power. e AC version can be powered by AC or DC power.
Power for DC
Version:
external 12VDC power
source
9-16.5VDC; 800 mA
Power for AC
Version:
internal AC switching power
supply
100-240VAC; 50-60Hz; 300 mA
Both AC and
DC versions:
lithium battery (for real time
clock)
2032 lithium ion
Electronics ARM7 embedded micropro-
cessor
DSP (digital signal process-
ing)
Digital processing of 5200A
information ensures accurate
and repeatable readings.
Introduction
Firmware
Feature Specication
Flash Memory Firmware eld upgradable with
local PC connection
Data Logging non-volatile data log memory
storage of 3750 records
sensor log (1000 records)
event log (1250 records)
calibration log (500 records)
Conguration
log data (1000
records)
Security password protection
Data ltering reads 2-3 times per second and
readings are averaged
Communication
Feature Specication
RS232 up to 100  (30m)
OR
Optional ethernet module remote TCP/IP PC access and/
or email alarming
Instrument to Instrument Networking
Feature Specication
Network 2 to 32 isolated
5200A and/or 5400 instru-
ments
RS485 up to 4000  (1220m)
entire network distance
AquaManager
Feature Other PC Requirements
Runs on Windows 2000/XP/
Vista/Windows 7 operating
systems
PC capable of running Windows
2000
VGA display card
CD-ROM Drive
Total RAM Installed: 16MB or
greater
100 MB free hard-disk space
Introduction