User Manual

YSI 5200A
104
YSI 5200A
105
In the above sensor log screen shot ORP is disabled.
Event Logging
Menus → System → Data Logging → Event Logging
Control, Alarm, and Timer relays assigned to 5400 systems create events when they
turn on and o. In addition, AC power failures, ethernet device error messages,
and slave network failures are create events. ese events are stored in the Event
Log. Event logs identify the 5200A system, are time and date stamped, and record
relay the action (“on” or “o”).
Enter Event Logging menu1.
Menus → System → Data Logging → Event Logging
Use2.
▲
and
▼
to scroll and highlight submenus.
Press3.

to select.
Press4. to turn o or on.
Press5. to save conguration and return to Run Screen.
Press to view the 25 most recent event logs.
Press to view active (“on”) non timer events. See Control Menu - page158
for additional information.
Notes:
e General Alarm does not create an event log whether a general alarm -
relay is enabled or not.
- Events are not recorded when relays de-energize due to systemwide events.
Systemwide events include: calibration, Svr Hold, factory resets, power
cycle, 30 second sensor system reset, relay test, and disabling systems.
Event logs record the default system name and not the user congured -
system name.
Conguring the 5200A
Event logs do not record relay number or user congured relay name. -
Aux analog (non temperature) events will always display “alarm” regard- -
less if alarms are enabled, see below screen shot on le.
Aux digital events will never display “alarm” regardless if alarms are -
enabled, see below screen shot on right.
Clear Logs
Menus → System → Data Logging → Clear Logs
Use the Clear Log option to permanently delete all event and/or sensor log records
from the 5200A.
Before permanently deleting sensor and event logs, poll all data using AquaManager.
AquaManager will store all logs to a database in PC database.
Enter Clear Log menu1.
Menus → System → Data Logging → Clear Logs
Use2.
▲
and
▼
to scroll submenu.
Press3.

to select.
e instrument will prompt, “Are You Sure?” Press one of the following 4.
sokeys to conrm: .
Selecting “Yes” automatically deletes logs and then returns to the Run 5.
Screen aer approximately three seconds.
Selecting “No” or “Cancel” does not delete logs and returns to the Data 6.
Logging menu.
Conguring the 5200A