Owner's manual

YSI 5200A
173
YSI 5200A
172
Installing AquaManager
AquaManager provides data logging, graphing, autopolling, mapping, system con-
guration control, and displays near real-time sensor and aux input values* at the
desktop PC. AquaManager is a valuable tool for remote and local access applications.
An extensive online Help system is provided with AquaManager.
*Near real-time - e AquaManager map is updated several times a minute as
AquaManager constantly communicates with the nodes during Autopolling using
SMS commands. is results in displaying near real-time sensor and aux input
values on the map.
One copy of AquaManager per machine is required.
PC Requirements and Features
System requirements:
- PC capable of running Windows 2000
- Microso Windows 2000/XP/Vista/7 compatible
- VGA display card
- CD-ROM Drive
- Total RAM installed 16 Megs or greater
- 100 MB of free hard-disk space
- Internet Explorer 7.0, or higher
- Adobe Flash 10B or higher
- Administrator privileges on the PC where the application is being installed
- In addition, Vista users must enable UAC properties prior to AquaManager
registration. Go to Aquamanger.exe le properties in the program le folder
and check the box ‘Run with Administrator Privileges’.
AquaManager
Additional System Recommendations:
- Total RAM installed 64 Megs or greater
- 300 MB of free hard-disk space
- latest versions of Microso including O/S and Internet Explorer.
Software Installation
1. Run AquaManager.exe on the CDROM and follow the instructions in the
installation setup.
2. Refer to the README.txt le on the CDROM for additional information
on installation and use of the AquaManager application.
Getting started
Open application and register. e registration code number is located on the back
of CD case.
See AquaManager Online Help for detailed application conguration information.
Before the node can be accessed using AquaManager, perform the following:
1. Create, or Open network;
2. Insert group;
3. Insert node(s);
A. Determine communication method;
B. Obtain 5200A and/or 5400 serial number(s);
4. Poll node to obtain current node conguration;
5. Complete conguration of node and AquaManager features for your ap-
plication.
AquaManager