Owner's manual

YSI 5200A
115
YSI 5200A
114
6. AquaManager Program Folder includes the latest version of instru-
ment rmware. e lastest rmware is stored as an .mdb le in the PC
Program Files>AquaManager>Firmware. At AquaManager, Firmware
Updater>File>Load Firmware Database. Locate and load this le into the
Firmware Updater.
7. Le click
button.
window opens.
8. Select “Yes” and the following screens will appear.
On instrument On PC
YSI 5200A/5400/5500 Bootstrap Loader screen Flash Programmer uploading rmware into
5200A
Conguring the 5200A
Note:
- If the YSI 5200A/5400 Bootstrap Loader screen does not appear at the
instrument aer above steps manually place 5200A in downloader at
Menus → System → Downloader. Close and reopen AquaManager. Reopen
Flash Programmer and repeat steps starting at 6.
- Power cycle to exit downloader and return to run screen. Do not power
cycle during an active upload.
- If aer manually placing the 5200A into downloader and the Flash Pro-
grammer utility still does not upload rmware see Force Downloader
- page 116.
9. e 5200A will reboot (power cycle) when rmware upload is complete.
10. Select “ok” when this window appears
11. Close Flash Programmer.
12. Verify version information to conrm downloaded code:
13. Menus → System → Version
14. If applicable, disable Force Serial Port conguration - page 100.
Notes:
- During upload, 5200A systems are placed into Service Hold which de-
energizes any active systems including energized relays. See SVR Hold
Menu - page 169 for additional information. No “o” event is created
for system relays that de-energize when 5200A is placed in downloader.
Systems are reset when power is cycled aer downloader.
- All logs and instrument conguration are retained when 5200A rmware
is updated.
- Display board code loads rst, followed by control board code. e display
board screen ickers when display board code is loading. e display stops
ickering when the control board code is loading. e Firmware Updater
progress bar will complete two full scrolls during rmware updating.
- Total download time is approximately nine minutes; eight minutes to
Conguring the 5200A