Owner's manual

YSI 5200A
93
YSI 5200A
92
Notes:
- When DHCP is enabled, the 5200A IP address is not updated at the IP
address menu.
- When DHCP is enabled, the serial to ethernet device acquires SMTP and
DNS addresses during initialization.
- AquaManager requires a static IP address; therefore, DHCP must be
disabled when using AquaManager. Consult the network administrator
to obtain a static IP address.
- Power cycle the 5200A whenever DHCP is enabled.
IP Address
Menus → System → Communications → Ethernet → IP Address
e IP address can only be congured when DHCP is disabled.
Notes:
- AquaManager users should program the Gateway address either by force
serial port in the AquaManager Communication menu or locally at the
5200A. Poll node using RS232 communication to upload conguration
information including: static IP, port, subnet, and gateway addresses.
- When DHCP is enabled, the IP address is not updated at the IP address
menu.
- Power cycle the 5200A whenever a new IP address is congured.
- Numbers between 0-255 are valid for each of the four (4) IP Address elds.
Subnet Mask
Menus → System → Communications → Ethernet → Subnet Mask
A Subnet mask address can only be congured when DHCP is disabled. e subnet
mask number helps to dene the relationship between the host (computers, rout-
ers, switches, etc.) and the rest of the network. Consult the network administrator
when conguring this menu.
Notes:
- When DHCP is enabled, the Subnet Mask address is not updated at the
Subnet Mask menu.
- AquaManager users should program the Subnet mask either by force
serial port in the AquaManager Communication menu or locally at the
5200A. Poll node using RS232 communication to upload conguration
information including: static IP, port, subnet, and gateway addresses.
- Numbers between 0-255 are valid for each of the four (4) Subnet Mask
IP Address elds.
Conguring the 5200A
Gateway
Menus → System → Communications → Ethernet → Gateway
e Gateway address can only be congured when DHCP is disabled. A gateway IP
refers to a device on a network which sends local network trac to other networks.
Consult the network administrator when conguring this menu.
Notes:
- When DHCP is enabled, the Gateway address is not updated at the
Gateway menu.
- AquaManager users should program the Gateway address either by force
serial port in the AquaManager Communication menu or locally at the
5200A. Poll node using RS232 communication to upload conguration
information including: static IP, port, subnet, and gateway addresses.
- Numbers between 0-255 are valid for each of the four (4) Gateway IP
Address elds
Port
Menus → System → Communications → Ethernet → Port
e default port number for the ethernet module is 10001. Consult the network
administrator when conguring this menu.
Note:
- AquaManager users should program the port number either by force
serial port in the AquaManager Communication menu or locally at the
5200A. Poll node using RS232 communication to upload conguration
information including: static IP, port, subnet, and gateway addresses.
DNS Address
Menus → System → Communications → Ethernet → DNS
Domain Name Service (DNS) numbers are IP addresses that a workstation or server
uses to refer to specic servers that resolve domain names to IP addresses.
Notes:
- When DHCP is enabled, the serial to ethernet device will acquire SMTP
and DNS addresses during initialization.
- When DHCP is enabled, the DNS address is not updated at the IP ad-
dress menu.
- Numbers between 0-255 are valid for each of the four (4) DNS IP Ad-
dress elds
Conguring the 5200A