Owner's manual

YSI 5200A
201
YSI 5200A
200
is page le intentionally blank.
Appendix 3 - Menu Maps
is Appendix contains the menu structure for the 5200A. e menu maps contain
all submenus, factory defaults, and user selectable ranges of the 5200A rmware.
Menu maps are presented in hierarchal format. All menus are accessed by press-
ing
at the Run Screen. Menu maps are provided in the following order:
1. Calibration menu
2. System menu
3. Sensor Setup menu
4. Timers menu
e example below shows how to navigate the menu maps in the 5X00. First f ind
the menu you want to congure. For example, IP address for the serial to ethernet
device. en follow the path highlighted at the top of menu. Continue to follow the
menu path under and to the right of the menu heading to access submenu;
Key strokes to enter IP address as depicted above.
1. From the Run Screen, press the sokey below
label;
2.
to enter System menu.;
3. Scroll down (if necessary) to highlight communication menu;
4.
to enter communication menu;
5. Scroll (if necessary) to highlight ethernet menu;
6.
to enter ethernet menu;
7. Scroll down (if necessary) to highlight IP address menu;
8.
to enter IP address menu; - numeric keypad is displayed;
9. Congure the IP address using numeric keypad;
10.
aer entering IP address;
11.
to save conguration and return to run screen.
Menu Maps