User manual

pages

By default the configur ation pages are reached by opening the browser on a connected device

and selecting 192.168.1.1

x If you previously chang ed the IP address range, for example to 192.168.123.254, you

must us e this address to ac cess the configuration pages

x If you changed the IP address and no longer know the new setting, you should

perform a factory re-s et and then reconfigure your YOYORouter.

4.3.Problems with the Mo bile Broadband Con nection

YOYO Router isn’t connecting to Mobile Broadband

Basics:

x Make sure that the SIM is correctly inserted in your USB Modem

x Check on the Status page that the USB Modem is recognized by YOYORouter

x If the SIM needs a PIN code, use the configuration wizard to enter the PIN to

YOYORouter.

x Check that there is mobile service at your location

The default connection profile suits most users , however you may need to select an

alternative:

1. Access the configuration wizard by select ing 192.168.1.1 in your browser

2. At the 3G step, select Manual for Dial-Up Profile

3. Select your country

4. Select your mobile operator. If there are several listings, select the one that most

closely corresponds with your subscription (for example, PrePay). If you have special

settings or your operator is not shown, select Others and enter the details manually.

5. Complete the wizard

6. Allow YOYORouter to restart

7. Check if a connection can now be made.

Note: If you need to ask your mobile operator for settings, you will need the following:

x APN (Access Point Name)*

x Username

x Password

x Primary DNS

x Secondary DNS