User manual

53
1. IP Address for Sys log : Host I P of destination where sys log will be sent to. Check
Enable to enable this function.
2. E-mail Alert Enable : Check if you want to enable Email alert (send syslog via email).
3. SMTP Server IP and Port : Input the SMTP server IP and port, which are connected with
':'. If you do not specify port number, the default value is 25.
For example, "mail.your_url.com" or "192.168.1.100:26".
4. Send E-mail alert to: The recipients who will receive these logs, you c an assign more
than 1 recipient, using ';' or ',' to separate these email addresses.
5. E-mail Subject :Thesubjectofemailalert,thissettingisoptional. Click on
“Save” to store your settings or click “Undo” to give up the changes.
3.2.4.2.Dynamic DNS
To host your server o n a c han gi ng IP a ddress , you have t o use dyn am ic domai n name servic e
(DDNS). So that anyone wishing to reach your hos t only nee ds to k now the name of it.
Dynamic DNS will map the name of your host to your current IP address, which changes each
time you connect your Internet service provider.
Before you enable Dynamic DNS ,youneedtoregisteranaccountononeoftheseDynamic
DNS servers that we list in Provider field.
To enable Dynamic DNS click the check box next to Enable in the DDNS field. Next you have
to enter the appropriate information about your Dynamic DNS Serve . Provider , Host Name ,
Username/E-mail ,and Password/Key .Youcangetthisinformationwhenyouregisteran
account on a Dynamic DNS server.
Click on “Save” to store your settings or click “Undo” to give up the changes.