User manual

3.2.1.3.Wireless Settings

Wireless s ettings allow you to set the wireless configuration items.

1. Wireles s Module:

You can enable or disable wireless f unction.

2. Network ID (SSID):

Network ID is used for identifying the Wireless LAN (WLAN). Clien t

stations can roam freely over this device and oth er Access Points that have the same

Netwo rk ID. (The factory default setting is “default” )

3. SSID Broadcast:

The router will broadcast beacons that have some information,

including SSID so that wireless clients c an k no w how many AP devices by scanning the

ne twork. Ther efore, if this setting is configured as “Disable”, the wireless clients can not

find the device from beacons.

4. Channel:

The radio channel number . The permissible channels depend on the Regulatory

Domain. The factory default setting is as follow: channel 1~11 for North America. (Channel

1~13 for European (ETSI); channel1~ 1 4 for Japan).

5. Wireless Mode:

Choose “B/G mixed”, “B only”, “G only”, “N only”, “G/N mixed” or “B/G/N

mixed”. The factory default setting is “B/G/N mixed”.

6. Authentication mode:

You may select one of authentication to secure your wireless

network: Open Shared, Auto, WPA-PSK, WPA, WPA2-PSK, WPA2,

WPA-PSK/WPA2-PSK, or WPA /WPA2.