User manual

3. Primary DNS/Secondary DNS: Optional, This feature allows you to assign a DNS Servers

4. Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send o utgoing

packets.

Auto Rec on nect (Always- on) : The device will link with ISP until the connect io n is

established.

Manua lly: The device will not make the link until so meone clicks the

Connect-button in the Status-page.

5. Maximum Idle Time: the amount of time of inactivity before dis connecti ng your PPPoE

session. Set it to zero or enable “ Auto-reconnect” to disable this f eature.

6. Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave it

blank.

7. Assigned IP Address: O ptional

,InputtheIFaddressyouwant.Usually,leaveitblank.

8. Maximum Transm ission Unit (MTU): Most ISP offers MTU value to u sers. The default

MTU value is 0(auto).

9. NAT disable: the option bridges data form WA N port to LAN port.