User manual

E. PPTP

1. Activate WW AN for Auto-Failover

:Withthisfunctionenabled,whentheEthernetWAN

connection is broken, the device will automatically activate the WWAN connection

and keep you connected to internet with the alternative WWAN broadband service.

Meanwhile, if the device dete ct e d tha t the Ethern e t WAN con n e ct i o n is recovered, your

broadband connection will be switched to use the Ethernet WAN service

2. IP Mode

:PleasechecktheIPmodeyourISPassigned,andselect“StaticIPAddress”or

“Dynamic IP Address”.

3. My IP Address

and

My Subnet Mask

:TheprivateIPaddressandsubnetmaskyourISP

assigned to you.

4. Ro uter IP

and

Server IP Address/Name

: The IP addr ess of the PPTP server and

designated Router provided by your ISP.

5. PPTP Account

and

Password

:TheaccountandpasswordyourISPassignedtoyou.

If you don't want to change the password, keep it blank.

6. Connection ID

: Optional. Input the connection ID if your ISP requires it.

7. Maximum Idle Time

: the time of no activity to disconnect your PPTP session. Set it

to zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is enabled,

this device will connect with ISP automatically after system is restarted or

connection is dropped.

8. Connection Control

:Thereare3modestoselect:

Connect-on-de mand

: The device will link up with ISP when the clients send

outgoing packets.