User manual

3.2.1.1.Network Setup

1. Ethernet port Configuration:

Off:

Disable the Ethernet port.

LAN:

The Ethernet port is as LAN port.

WAN:

The Ethernet port is as LAN port.

Auto:

It will be WAN Port if a DHCP server can be detected on the Ethernet port.

Otherwise, it will be LAN port.

2. LAN IP Address:

The local IP address of this device. The computers on your network

must use the LAN IP address of this device as their Default Router . You can change it if

necessary.

3. Subnet Mask:

Input your Subnet mask. (All devices in the network must have the same

subnet mask.) T he default sub net mask is 255.2 55.255.0.

4. WAN Interface:

Select Et hernet WAN or Wireless WAN to continue.

5. WAN Type

: WAN connection type of your ISP. You can cli ck WAN Type combo button to

choose a correct one from the follo wing options: