User manual

16
2.8.Setting up YOYORouter EE1 in Share Mode
1. Switch on YOYORouter EE1.
2. Connect to YOYORouter via Wi-Fi or Ethernet, access the status page at http://192.168.1.1 and
log in.
3. Select Wizard. Click through the Wizard making any changes to the default settings if
necessary.
4. When you get to Select WAN Type in the Wizard
x Select WAN Interface to be Wireless WAN.
x Select WAN Type: Wi-Fi HotSpot and click Next>
YOYORouter s cans for available Wi-Fi networks and presents a list; select the required network.
5. Enter any requ ired security details for the Wi-Fi network to which you are connecting. The
YOYORouter automatically uses the same Wireless Channel.
6. At the end of the Wizard, check The Ethernet will be set as LAN Port and click Apply
Settings. YOYORouter restarts.
7. Re-connect to the YOYORouter Wi-Fi network; you may need to re-make the connection in line
with your new settings.
8. If the Wi-Fi network to which you are connecting requires a username and pass word at a log-in
page, open your browser and input them now.
Note: In this mode you can also connect a device using the Ethernet LAN port.