User manual

13
2.6.Setting up YOYORouter EE1 in Ethernet WAN Mode
1. Plug in the Ethernet cable and switch on YOYORouter EE1. Typical WAN sources incl ude
ADSL modems, cable modems and hotel/office cabled Internet connections.
2. Connect to YOYORouter via Wi-Fi, acc ess the status page at http://192.168.1.1 and log in.
3. Select Wizard and step through the Setup wizard. At the step Select WAN Type
x Select WAN Interface type Ethernet WAN.
x Select the required WAN Type.
x Enter the further inform ation requested, as applicable. See Configuration Reference
section in the User Guide for more information.
4. At the end of the Wizard, check The Ethernet Port will be set as WAN Port and click Apply
Settings. YOYORouter restarts.
5. Re-connect to the YOYORouter Wi-Fi network; you may need to re-make the connection in line
with your new settings.