User manual

2.5.Setting up YOYORouter EE1 in Wireless WAN Mode

Note: A full list of supported USB modems is available from the Support ed Cards List link in the

status page, or from www.yoyomotion.com.

1. Make sure your SIM card is installed in the USB modem. Consult the USB Modem’s

documentation for further information.

2. Plug in your USB Mo dem and turn on YOYORouter EE1. Allow at least 60 seconds for the USB

modem to be detec ted and configured.

In most cases YOYORouter EE1 self-configures and operates in Wireless WAN Mode using

default settings. You may need to customize the settings, for example in the following cases:

x Your SIM req ui res a PI N Co de .

x Your mobile broadband subscription requires different settings to those that YOYORouter

selected by default.

x You have special mobile broadband settings, for example a private APN (Access Point

Name).

x You wish to change Wi-Fi settings.

To customize settings:

3. Connect to YOYORouter via Wi-Fi or Ethernet, access the status page at http: //192.168.1.1

and log in.

4. Select Wizard and step through the Setup wizard until you reac h step Select WAN Type.

x Select WAN Interface option Wireless WAN.

x Select WAN Type 3G.

5. 3G Mobile Network Settings

x Connection settings are normally selected automatically from your SIM.

x Select Dial-Up Profile option Manual at the 3G step if you need to s elect alternative or

enter special settings. Select your country and the net work operator, or Others to enter

your own s ettings.

x If your SIM requires a PIN code, enter it now.