User guide

Setting up YOYORouter EE1 in Ethernet WAN Mode
1. Plug in the Ethernet cable and switch on YOYORouter EE1. Typical WAN sources include ADSL
m
odems, cable modems and hotel/office cabled Internet connections.
2. Connect to YOYORouter via Wi-Fi, access the status page at http://192.168.1.1 and log in.
3. Select Wizard and step through the Setup wizard. At the step Select WAN Type
Select WAN Interface type Ethernet WAN.
Select the required WAN Type.
Enter the further information requested, as applicable. See Configuration Reference section in the User
Guide for more information.
4. At the end of the Wizard, check The Ethernet Port will be set as WAN Port and click Apply Settings.
YOYORouter restarts.
5. Re-connect to the YOYORouter Wi-Fi network; you may need to re-make the connection in line with
your new settings.