User guide

Preparing YOYORouter EE1

. Open the battery compartment

• Slide the cover in the direction shown until it clicks open.

• Lift the cover away from YOYORouter.

2. Insert the battery

• WARNING: Always be sure to disconnect the power before inserting or removing the battery.

• Hold the battery so that the three gold contacts align with the three gold pins in the compartment.

• Insert the battery so that the contacts meet.

• Press the other end of the battery in to the compartment so that it clips in to place.

3. Replace the battery compartment cover

• Place the cover over the battery compartment, leaving a gap of about 5mm.

• Slide the cover towards the body of YOYORouter.

• The cover clicks shut.

4. Connect the power cord and plug in the AC adaptor.

5. Turn on YOYORouter EE1.