User guide

Setting up YOYORouter in Share Mode
1
. Turn on YOYORouter in router mode by sliding the 3-way switch to the ROUTER position.
2
. Connect to YOYORouter, access the status page at http://192.168.1.1 and log in.
3. Select the configuration wizard.
4. When you get to Select WAN Type in the Wizard, select WAN Type Wi-Fi Hotspot and click Next>
5. YOYORouter scans for available Wi-Fi networks and presents a list; select the required network.
6. Enter any required security details for the Wi-Fi network to which you are connecting. The YOYORouter
automatically uses the same Wireless Channel.
7. For the YOYORouter Wireless LAN, we recommend WPA-PSK / WPA2-PSK security. The settings shown
provide widest compatibility.You can set your own password in Preshare Key (recommended).
8. At the end of the Wizard, click Apply Settings. YOYORouter restarts.
9. Re-connect to the YOYORouter Wi-Fi network, entering your selected password (if any).
10.If the Wi-Fi network to which you are connecting requires a username and password at a log-in page,
open your browser and input them now.