User guide

5
. Configure Mobile Network Settings
•
Select Dial-Up Profile option Manual at the 3G step if you need to select alternative or enter special
settings. Select your country and the network operator, or Others to enter your own settings.
•
If your SIM requires a PIN code, enter it now.
6. Configure the Wireless LAN (Wi-Fi) settings
• Change the Network name (SSID) to a name of your own choice, if required
• We recommend WPA-PSK / WPA2-PSK security; the settings shown provide widest compatibility.
• You can set your own network password in Preshare Key (recommended).
7. At the end of the Wizard, click Apply Settings. YoYoRouter restarts.
8. You may need to re-make the Wi-Fi connection in line with your new settings.
Indicator Lights in Router Mode
Battery and Power status
Mobile Internet Connection Status
Off
Battery is fully charged
Battery is powering the router
Battery is on charge
Battery low
Battery is fully charged
(charger connected)
Low signal
Medium signal
Strong signal
Flash denotes roaming
Disconnected
Connecting
Connected (GPRS/EDGE)
Data transfer (GPRS/EDGE)
Connected (UMTS/HSDPA/HSPA)
Data transfer (UMTS/HSDPA/HSPA)
Wi-Fi (WLAN) is on
Signal Strength and Roaming Alert Wi-Fi Status
Data transfer over Wi-Fi
Fast flash denotes WPS mode